LIke to be a bit DIY? Nervous about having a glassware shipped? Well here's the perfect solution.
Each decal measures 7cm wide, height varies per design whilst keeping it square.
Decals are made using high quality permanent outdoor waterproof vinyl. Once applied to your mug/glass you will need to only handwash it without allowing it to be soaking on the outside.
You will receive your selected decal + an alcohol swab to clean the area before application.
Due to the custom nature of my products please allow up to 10 days for your glass to be made. If you need it sooner please contact me to see what can be arranged. A $8 rush fee may apply. Decals will be sent via tracked envelope post unless other items are ordered then via tracked parcel post.
HOW TO APPLY A DECAL
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the decal from adhering well.
Peel the yellow paper backing off the decal.
Slowly lower the decal onto the surface and rub it in place firmly with a squeegee or credit card.
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If sticker pulls away from the surface repeat Step 3